Yuasa YT12A-BS Motorcycle Battery

Specification
Manufacturer: YUASA
Part number: YT12A-BS
Battery type: Sealed maintenance-free battery
Filling kit included: Yes
Dimensions: 150mm x 88mm x 105mm
Capacity rating: 11Ah
Cold-start performance: 175EN
Maximum charging rate: 1 Amp
Weight (filled): 3.8kg
Terminal layout: Left: + Right: - (With the terminals on the edge nearest to you)
Sealed Battery for Motorbikes including

Suzuki Hayabusa GSXR1300
Suzuki GSXR750
Suzuki GSXR1000

Replaces the following part numbers
FT12A-BS
Yuasa YT12A-BS
YT12A-4
CT12A-A
YTX11-BS
YTX11-4
Varta YTR9-BS
Suzuki 33610-02F01

Varta stock code 511 901 014
JIS Code YT12A-BS

This Motorcycle Battery comes with an acid pack and instructions on how to prepare, once the battery is filled it will need to be charged to complete the activation process.

PLEASE CHECK THAT YOU HAVE THE CORRECT BATTERY BEFORE STARTING THE FILLING INSTRUCTIONS, WE CANNOT RETURN / EXCHANGE IF  YOU HAVE THE INCORRECT BATTERY AND HAVE STARTED THE FILLING PROCESS.

FILLING INSTRUCTIONS :

1. Put the battery on to a flat, solid base and remove the foil strip from the battery.

2. Take the acid pack out of the box and the remove the plastic wrap.

3. Remove the Black sealing strip from the top of the Acid Pack and keep it to one side for use later on.

DO NOT REMOVE THE FOIL FROM THE ACID PACK

4. Press the Acid pack upside down on to the battery cell openings firmly and as far as it will go, the acid will be automaticly disperced to the correct level for each cell.

LEAVE THE BATTERY FOR A 30 MIN PERIOD

5. Remove the Empty Acid Pack and place the black sealer stip over the battery cells, press the black sealer strip down fully, once the battery is Sealed, it will not need to be opened again, doing to so will void any .

6. Once the battery is filled and sealed it will need to be charged on a motorcycle battery charger or trickle charger to complete the activation process.

CHARGE ONCE FILLED TO COMPLETE THE ACTIVATION PROCESS