YTX14AHL-BS Yuasa upgrade for YB14L-A2

Sealed upgrade to YB14L-A2 12N14-3A YMF14L-2
Same dimensions but a higher starting current of 210A CCA and sealed for life

Specifications
Manufacturer: YUASA
Battery type number: YTX14AHL-BS
Battery type: Sealed maintenance-free battery
Filling kit included: Yes
Dimensions: 134mm x 89mm x 166mm
Capacity rating: 12Ah
Cold-start performance: 210EN
Maximum charging rate: 1 Amp
Weight (filled): 4.9kg
Terminal layout: Left: - Right: + (With the terminals on the edge nearest to you)

Can replace the following part numbers
M62H4L
YB14L-A2
12N14-3A
YMF14L-2
SYB14L-BS
GMZ-3A
CB14L-A2
514 011 014
Suitable for use with;
Ducati F1 Montijuich Paso SS Supersport Replica
Ducati Pantah TL600 Indiana
Honda FT500 Ascot CB750SC Nighthawk
Honda VF700S Sabre CBR1000F Hurricane
Kawasaki KZ1000 Z1 series VN700-A Vulcan
Kawasaki EX500-A KL650-A E KLR ZX750-F Ninja
Moto Guzzi Breva Nevada V75
Suzuki GSX750F Katana GSX1100F Katana
Suzuki GS700E GS700ES GT750 LeMans
Suzuki GS1100G K L Katana GSX-R1100 GSX-R750
And many more

This Motorcycle Battery comes with an acid pack and instructions on how to prepare, once the battery is filled it will need to be charged to complete the activation process.

PLEASE CHECK THAT YOU HAVE THE CORRECT BATTERY BEFORE STARTING THE FILLING INSTRUCTIONS, WE CANNOT RETURN / EXCHANGE IF  YOU HAVE THE INCORRECT BATTERY AND HAVE STARTED THE FILLING PROCESS.

FILLING INSTRUCTIONS :

1. Put the battery on to a flat, solid base and remove the foil strip from the battery.

2. Take the acid pack out of the box and the remove the plastic wrap.

3. Remove the Black sealing strip from the top of the Acid Pack and keep it to one side for use later on.

DO NOT REMOVE THE FOIL FROM THE ACID PACK

4. Press the Acid pack upside down on to the battery cell openings firmly and as far as it will go, the acid will be automaticly disperced to the correct level for each cell.

LEAVE THE BATTERY FOR A 30 MIN PERIOD

5. Remove the Empty Acid Pack and place the black sealer stip over the battery cells, press the black sealer strip down fully, once the battery is Sealed, it will not need to be opened again, doing to so will void any .

6. Once the battery is filled and sealed it will need to be charged on a motorcycle or trickle charger to complete the activation process.

CHARGE ONCE FILLED TO COMPLETE THE ACTIVATION PROCESS